MolGraph
CAS 161529-21-1Not a supplier-issued SDS

Preliminary Safety Reference

1,1-Dimethylethyl N-[(1S)-1-(iodomethyl)-2-methylpropyl]carbamate

Back to CAS detail

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Identity

CAS Number

161529-21-1

Chemical name

1,1-Dimethylethyl N-[(1S)-1-(iodomethyl)-2-methylpropyl]carbamate

Molecular formula

C10H20INO2

Molecular weight

313.18 g/mol

Synonyms

1,1-Dimethylethyl N-((1S)-1-(iodomethyl)-2-methylpropyl)carbamate; (S)-tert-Butyl (1-iodo-3-methylbutan-2-yl)carbamate; (S)-1-Iodo-2-(Boc-amino)-3-methylbutane; C10H20INO2; (S)-tert-Butyl(1-iodo-3-methylbutan-2-yl)carbamate; Tert-butyl (S)-(1-iodo-3-methylbutan-2-yl)carbamate; tert-Butyl [(2S)-1-iodo-3-methylbutan-2-yl]carbamate; tert-butyl N-[(1S)-1-(iodomethyl)-2-methyl-propyl]carbamate

InChIKey

XBOPXPWVPIOUTD-MRVPVSSYSA-N

PubChem CID

11141505

Hazard / GHS Reference

GHS Pictograms

GHS07

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Handle in a well-ventilated area or fume hood.
  • Avoid contact with skin and eyes.
  • Avoid formation of dust and aerosols.
  • Store in a cool, dry place, away from incompatible materials.
  • Keep container tightly closed.
  • Wear a laboratory coat.
  • Wear compatible protective gloves.
  • Wear eye protection such as safety goggles or a face shield.
  • Use respiratory protection if ventilation is inadequate or exposure limits are exceeded.

First Aid / Accidental Release

  • In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.
  • Wash skin thoroughly with soap and water.
  • If inhaled, move to fresh air.
  • If swallowed, rinse mouth with water.
  • Seek medical attention if irritation persists or symptoms develop.
  • Evacuate personnel to safe areas and ensure adequate ventilation.
  • Avoid dust formation and breathing vapors, mist, or gas.
  • Collect spilled material using an inert absorbent and place in a suitable disposal container.
  • Clean up spills immediately, observing precautions in the Protective Equipment section.

Firefighting / Stability

  • Use water spray, dry chemical, carbon dioxide, or alcohol-resistant foam.
  • Wear self-contained breathing apparatus for firefighting if necessary.
  • Wear full protective firefighting gear.
  • Keep containers cool with water spray.
  • Stable under recommended storage conditions.
  • Avoid strong oxidizing agents.
  • Avoid strong reducing agents.
  • May be sensitive to light.

Physical and Chemical Reference

Appearance

White solid

Catalog reference value; verify against supplier SDS before use.

Physical State

Solid

Catalog reference value; verify against supplier SDS before use.

Melting Point

95.0 °C

Catalog reference value; verify against supplier SDS before use.

Boiling Point

278.0 °C

Catalog reference value; verify against supplier SDS before use.

Density

1.51 g/cm³

Catalog reference value; verify against supplier SDS before use.

Water Solubility

Insoluble

Catalog reference value; verify against supplier SDS before use.

Flash Point

116.5 °C

Catalog reference value; verify against supplier SDS before use.

Vapor Pressure

Estimated value, unit not specified

Catalog reference value; verify against supplier SDS before use.

Autoignition Temp

350.0 °C

Catalog reference value; verify against supplier SDS before use.

Transport / Shipment Review

HS6

292429

Preliminary catalog cue; verify before compliance decisions.

HS Code

292429

Source: catalog inference.

GHS Pictograms

GHS07

Preliminary catalog cue; verify before compliance decisions.

Compliance

standard-ruo

Preliminary catalog cue; verify before compliance decisions.

Registration Status

DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending

Registration values are catalog reference status cues and may require jurisdiction-specific review.

Shipment review

Shipment details require review before fulfillment.

Preliminary catalog cue; verify before compliance decisions.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.