Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
2387276-54-0
Chemical name
2-Fluoro-3-methoxy-5-(trifluoromethyl)benzoic acid
Molecular formula
C9H6F4O3
Molecular weight
238.14 g/mol
Synonyms
E96386
InChIKey
LCGNQGXCGZSJHP-UHFFFAOYSA-N
PubChem CID
163353730
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or fume hood.
- Avoid inhalation, ingestion, and skin/eye contact.
- Keep container tightly closed in a dry and well-ventilated place.
- Store away from incompatible materials.
- Research Use Only.
- Use appropriate personal protective equipment such as a lab coat.
- Wear compatible chemical-resistant gloves.
- Use eye protection, such as safety goggles or a face shield.
- In case of insufficient ventilation, wear suitable respiratory equipment.
First Aid / Accidental Release
- In case of inhalation, move to fresh air. If not breathing, give artificial respiration.
- For skin contact, wash immediately with plenty of soap and water. Remove contaminated clothing.
- In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If swallowed, rinse mouth with water. Do NOT induce vomiting.
- Seek medical attention if irritation or symptoms persist.
- Evacuate personnel to safe areas. Ensure adequate ventilation.
- Avoid dust or aerosol generation. Do not breathe dust or mist.
- Wear appropriate personal protective equipment.
- Carefully sweep up or vacuum spilled material and place in a suitable container for disposal.
Firefighting / Stability
- Use extinguishing media appropriate for the surrounding fire.
- Do not use a direct water stream as it may spread the fire.
- Firefighters should wear self-contained breathing apparatus and full protective gear.
- Keep containers cool with water spray.
- This material is generally considered stable under recommended storage conditions.
- Avoid strong oxidizing agents, strong acids, and strong bases.
- Hazardous decomposition products may include carbon oxides and hydrogen fluoride.
- No known hazardous reactions under normal conditions of use.
Physical and Chemical Reference
Appearance
white crystalline powder
Catalog reference value; verify against supplier SDS before use.
Physical State
solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
120.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
300.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.5 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
slightly soluble
Catalog reference value; verify against supplier SDS before use.
Flash Point
185.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated very low; unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
470.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
291899
Preliminary catalog cue; verify before compliance decisions.
HS Code
291899
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.