Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
2703616-06-0
Chemical name
4-Ethoxy-5-fluoro-2-(trifluoromethyl)benZoic acid
Molecular formula
C10H8F4O3
Molecular weight
252.16 g/mol
Synonyms
H80848
InChIKey
CUGPVMWQMDQVCT-UHFFFAOYSA-N
PubChem CID
171002908
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or under a fume hood.
- Avoid contact with skin, eyes, and clothing.
- Keep container tightly closed in a dry and well-ventilated place.
- Store away from incompatible materials.
- Wash thoroughly after handling.
- Wear safety glasses with side-shields or chemical safety goggles.
- Wear a laboratory coat or protective clothing.
- Wear compatible protective gloves.
- Use respiratory protection if ventilation is inadequate or if there is a risk of dust/aerosol exposure.
First Aid / Accidental Release
- If in eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If on skin, wash with plenty of soap and water.
- If inhaled, remove person to fresh air and keep comfortable for breathing.
- If swallowed, rinse mouth. Do NOT induce vomiting.
- Seek medical attention if irritation or symptoms persist.
- Ensure adequate ventilation during clean-up.
- Wear appropriate personal protective equipment (PPE).
- Avoid dust formation if the material is a solid.
- Carefully sweep up spilled material and place in a suitable container for disposal.
Firefighting / Stability
- Use water spray, dry chemical, foam, or carbon dioxide for extinction.
- Wear self-contained breathing apparatus for firefighting if necessary.
- Wear full protective gear to prevent contact with skin and eyes.
- Keep containers cool with water spray in case of fire.
- Stable under recommended storage conditions.
- No hazardous reactions known under normal conditions of use.
- Avoid strong oxidizing agents.
- Avoid excessive heat and direct sunlight.
- May decompose upon heating to produce carbon oxides, hydrogen fluoride, and other potentially hazardous fumes.
Physical and Chemical Reference
Appearance
White solid
Catalog reference value; verify against supplier SDS before use.
Physical State
Solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
130.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
290.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.55 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
Slightly soluble
Catalog reference value; verify against supplier SDS before use.
Flash Point
160.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated value, unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
450.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
291899
Preliminary catalog cue; verify before compliance decisions.
HS Code
291899
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.