Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
2735700-22-6
Chemical name
rac-6-methyl-2-((1R,2R)-2-(trifluoromethyl)cyclopropyl)-1,3,6,2-dioxazaborocane-4,8-dione
Molecular formula
C9H11BF3NO4
Molecular weight
265 g/mol
Synonyms
rac-6-methyl-2-[(1R,2R)-2-(trifluoromethyl)cyclopropyl]-1,3,6,2-dioxazaborocane-4,8-dione; 948-674-3; rel-6-Methyl-2-((1R,2R)-2-(trifluoromethyl)cyclopropyl)-1,3,6,2-dioxazaborocane-4,8-dione; 6-METHYL-2-(TRANS-2-(TRIFLUOROMETHYL)CYCLOPROPYL)-1,3,6,2-DIOXAZABOROCANE-4,8-DIONE; Z2856127345
InChIKey
MZVOQXONPHPGGX-PHDIDXHHSA-N
PubChem CID
67951111
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or fume hood to minimize exposure.
- Avoid inhalation of dust, vapor, mist, or gas. Avoid contact with skin and eyes.
- Keep container tightly closed in a dry, cool, and well-ventilated place.
- Store away from incompatible materials. Protect from moisture and light.
- Ensure good laboratory practices are followed, including proper hygiene.
- Wear appropriate personal protective equipment, including a lab coat.
- Use compatible chemical-resistant gloves (e.g., nitrile) for hand protection.
- Wear approved eye protection, such as safety goggles or a face shield.
- If airborne concentrations are expected, use respiratory protection as indicated by risk assessment.
First Aid / Accidental Release
- In case of inhalation, move to fresh air. If not breathing, give artificial respiration.
- For skin contact, wash immediately with plenty of soap and water. Remove contaminated clothing.
- In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
- If swallowed, rinse mouth. Do NOT induce vomiting.
- Seek medical attention if irritation or symptoms persist, following institutional emergency procedures.
- Evacuate personnel to safe areas and ensure adequate ventilation.
- Avoid dust or aerosol generation. Do not breathe dust.
- Wear appropriate personal protective equipment during cleanup.
- Collect spilled material using an inert absorbent and place in a suitable disposal container.
Firefighting / Stability
- Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide for extinguishment.
- Wear self-contained breathing apparatus and full protective gear for fire fighting.
- Keep containers cool with water spray if exposed to fire.
- Prevent fire-fighting water from entering drains or water courses.
- The product is considered stable under recommended storage conditions.
- Avoid strong oxidizing agents, strong acids, and strong bases.
- May react with incompatible materials. Refer to specific hazard information if available.
- Hazardous decomposition products may include carbon oxides, nitrogen oxides, boron oxides, and hydrogen fluoride.
- No known hazardous polymerization.
Physical and Chemical Reference
Appearance
White to off-white crystalline powder
Catalog reference value; verify against supplier SDS before use.
Physical State
Solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
120.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
380.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.3 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
Slightly soluble
Catalog reference value; verify against supplier SDS before use.
Flash Point
180.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated value, unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
350.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
293499
Preliminary catalog cue; verify before compliance decisions.
HS Code
293499
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.