CAS 74552-28-6Not a supplier-issued SDS

Preliminary Safety Reference

2-Chloroethyl N-(P-tolyl)carbamate

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Identity

CAS Number

74552-28-6

Chemical name

2-Chloroethyl N-(P-tolyl)carbamate

Molecular formula

C10H12ClNO2

Molecular weight

213.66 g/mol

Synonyms

666-777-9; 2-Chloroethyl p-tolylcarbamate; 2-Chloroethylp-tolylcarbamate; AUDBFZQXUVRMDA-UHFFFAOYSA-N; 2-Chloroethyl (4-methylphenyl)carbamate; 2-Chloroethyl 4-methylphenylcarbamate #

InChIKey

AUDBFZQXUVRMDA-UHFFFAOYSA-N

PubChem CID

267829

Hazard / GHS Reference

GHS Pictograms

GHS07

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Handle in a well-ventilated area or fume hood.
  • Avoid inhalation of dust, fumes, gas, mist, vapors, or spray.
  • Avoid contact with skin and eyes.
  • Keep container tightly closed in a dry, cool, and well-ventilated place.
  • Store away from incompatible materials.
  • Wear appropriate protective clothing, such as a lab coat.
  • Use compatible chemical-resistant gloves (e.g., nitrile, neoprene) for hand protection.
  • Wear approved eye protection, such as safety goggles or a face shield.
  • If ventilation is inadequate, use respiratory protection (e.g., dust/mist respirator) as required by risk assessment.

First Aid / Accidental Release

  • In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing and seek medical attention.
  • For skin contact, wash with plenty of soap and water. Remove contaminated clothing and wash before reuse. Seek medical attention if irritation persists.
  • If inhaled, move to fresh air. If not breathing, give artificial respiration. Seek medical attention.
  • If swallowed, rinse mouth. Do NOT induce vomiting. Seek medical attention.
  • Ensure adequate ventilation and remove all sources of ignition.
  • Avoid dust or aerosol generation during cleanup.
  • Wear appropriate personal protective equipment (PPE) as outlined in Section 8.
  • Contain spills with inert absorbent material and collect for proper disposal.
  • Prevent entry into drains, surface water, or soil.

Firefighting / Stability

  • Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide for extinguishing.
  • Specific hazards during fire fighting are not fully known; assume potential for hazardous combustion products.
  • Firefighters should wear self-contained breathing apparatus and full protective gear.
  • Keep containers cool with water spray if exposed to fire.
  • This material is considered stable under recommended storage conditions.
  • No specific hazardous reactions are known under normal conditions of use.
  • Avoid strong oxidizing agents and strong bases.
  • Hazardous decomposition products may include carbon oxides, nitrogen oxides, and hydrogen chloride gas.

Physical and Chemical Reference

Appearance

White to off-white solid

Catalog reference value; verify against supplier SDS before use.

Physical State

Solid

Catalog reference value; verify against supplier SDS before use.

Melting Point

95.0 °C

Catalog reference value; verify against supplier SDS before use.

Boiling Point

287.0 °C

Catalog reference value; verify against supplier SDS before use.

Density

1.23 g/cm³

Catalog reference value; verify against supplier SDS before use.

Water Solubility

Slightly soluble

Catalog reference value; verify against supplier SDS before use.

Flash Point

126.2 °C

Catalog reference value; verify against supplier SDS before use.

Vapor Pressure

Estimated very low; unit not specified

Catalog reference value; verify against supplier SDS before use.

Autoignition Temp

420.0 °C

Catalog reference value; verify against supplier SDS before use.

Transport / Shipment Review

HS6

292429

Preliminary catalog cue; verify before compliance decisions.

HS Code

292429

Source: catalog inference.

GHS Pictograms

GHS07

Preliminary catalog cue; verify before compliance decisions.

Compliance

standard-ruo

Preliminary catalog cue; verify before compliance decisions.

Registration Status

DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending

Registration values are catalog reference status cues and may require jurisdiction-specific review.

Shipment review

Shipment details require review before fulfillment.

Preliminary catalog cue; verify before compliance decisions.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.