Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
1240528-52-2
Chemical name
2,2,2-trifluoroethyl N-(1-tert-butyl-4-cyano-1H-pyrrol-2-yl)carbamate
Molecular formula
C12H14F3N3O2
Molecular weight
289.25 g/mol
Synonyms
G25097; Z979570524; 2,2,2-trifluoroethylN-(1-tert-butyl-4-cyano-1H-pyrrol-2-yl)carbamate
InChIKey
MTYWJIOBYGTZID-UHFFFAOYSA-N
PubChem CID
47002962
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or fume hood.
- Avoid contact with skin, eyes, and clothing.
- Keep container tightly closed in a dry and well-ventilated place.
- Store away from incompatible materials.
- Wear a laboratory coat to protect against splashes.
- Use appropriate eye protection such as safety goggles or a face shield.
- Wear chemical-resistant, compatible gloves.
- Ensure adequate ventilation or use a fume hood to control airborne levels.
- Dispose of contents and container in accordance with local, regional, national, and international regulations.
First Aid / Accidental Release
- If inhaled, move to fresh air and keep at rest in a position comfortable for breathing.
- In case of skin contact, wash with soap and plenty of water.
- In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally.
- If swallowed, rinse mouth with water. Do NOT induce vomiting.
- Seek medical attention if irritation or symptoms persist.
- Avoid dust formation and breathing vapors, mist, or gas.
- Ensure adequate ventilation during cleanup.
- Sweep up and shovel into suitable, closed containers for disposal.
- Prevent further leakage or spillage if safe to do so.
Firefighting / Stability
- Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
- Wear self-contained breathing apparatus for firefighting if necessary.
- Wear full protective firefighting gear.
- Prevent runoff from fire control from entering waterways.
- Stable under recommended storage conditions.
- Avoid strong oxidizing agents.
- May react with strong acids and bases.
- Hazardous decomposition products may include carbon oxides, nitrogen oxides, and hydrogen fluoride.
Physical and Chemical Reference
Appearance
white to off-white crystalline powder
Catalog reference value; verify against supplier SDS before use.
Physical State
solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
105.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
300.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.3 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
low
Catalog reference value; verify against supplier SDS before use.
Flash Point
185.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated value, unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
400.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
293399
Preliminary catalog cue; verify before compliance decisions.
HS Code
29339980
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.