MolGraph
CAS 1391230-73-1Not a supplier-issued SDS

Preliminary Safety Reference

3-Amino-4-[3,5-bis(trifluoromethyl)phenyl]butyric Acid

Back to CAS detail

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Identity

CAS Number

1391230-73-1

Chemical name

3-Amino-4-[3,5-bis(trifluoromethyl)phenyl]butyric Acid

Molecular formula

C12H11F6NO2

Molecular weight

315.21 g/mol

Synonyms

3-Amino-4-[3,5-bis(trifluoromethyl)phenyl]butyricAcid; 3-Amino-4-(3,5-bis(trifluoromethyl)phenyl)butanoic acid; GJIOUDGNHUFMOW-UHFFFAOYSA-N; AC4117

InChIKey

GJIOUDGNHUFMOW-UHFFFAOYSA-N

PubChem CID

89907181

Hazard / GHS Reference

GHS Pictograms

GHS07

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Handle in a well-ventilated area or under a fume hood.
  • Avoid contact with skin, eyes, and clothing.
  • Keep container tightly closed in a dry and cool place.
  • Store away from incompatible materials.
  • Wash hands thoroughly after handling.
  • Wear a lab coat or protective clothing.
  • Use compatible chemical-resistant gloves.
  • Wear eye protection such as safety goggles or a face shield.
  • Ensure adequate ventilation or use respiratory protection if dust or aerosols are generated.

First Aid / Accidental Release

  • In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.
  • Wash skin thoroughly with soap and water.
  • If inhaled, move to fresh air.
  • If swallowed, rinse mouth with water.
  • Seek medical attention if irritation persists or symptoms develop.
  • Evacuate personnel to safe areas.
  • Avoid dust formation and breathing vapors, mist, or gas.
  • Wear appropriate personal protective equipment.
  • Sweep up or absorb spilled material and place in a suitable disposal container.

Firefighting / Stability

  • Use water spray, dry chemical, carbon dioxide, or alcohol-resistant foam.
  • Wear self-contained breathing apparatus for firefighting if necessary.
  • Wear full protective firefighting gear.
  • Keep containers cool with water spray.
  • Prevent runoff from entering drains or waterways.
  • Stable under recommended storage conditions.
  • May react with strong oxidizing agents.
  • Avoid strong acids and strong bases.
  • Avoid conditions that generate dust.

Physical and Chemical Reference

Appearance

White crystalline solid

Catalog reference value; verify against supplier SDS before use.

Physical State

Solid

Catalog reference value; verify against supplier SDS before use.

Melting Point

165.0 °C

Catalog reference value; verify against supplier SDS before use.

Boiling Point

400.0 °C

Catalog reference value; verify against supplier SDS before use.

Density

1.5 g/cm³

Catalog reference value; verify against supplier SDS before use.

Water Solubility

Slightly soluble

Catalog reference value; verify against supplier SDS before use.

Flash Point

280.0 °C

Catalog reference value; verify against supplier SDS before use.

Vapor Pressure

Estimated value, unit not specified

Catalog reference value; verify against supplier SDS before use.

Autoignition Temp

380.0 °C

Catalog reference value; verify against supplier SDS before use.

Transport / Shipment Review

HS6

292249

Preliminary catalog cue; verify before compliance decisions.

HS Code

292249

Source: catalog inference.

GHS Pictograms

GHS07

Preliminary catalog cue; verify before compliance decisions.

Compliance

standard-ruo

Preliminary catalog cue; verify before compliance decisions.

Registration Status

DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending

Registration values are catalog reference status cues and may require jurisdiction-specific review.

Shipment review

Shipment details require review before fulfillment.

Preliminary catalog cue; verify before compliance decisions.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.