Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
2451907-24-5
Chemical name
6-Bromo-2-fluoro-3-methoxy-4-(trifluoromethyl)benzoic acid
Molecular formula
C9H5BrF4O3
Molecular weight
317.03 g/mol
Synonyms
MWXHDRNMVFIWGU-UHFFFAOYSA-N
InChIKey
MWXHDRNMVFIWGU-UHFFFAOYSA-N
PubChem CID
154645222
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or fume hood.
- Avoid inhalation, ingestion, and skin/eye contact.
- Keep container tightly closed in a dry and well-ventilated place.
- Store away from incompatible materials.
- Use appropriate personal protective equipment such as a lab coat, compatible gloves, and eye protection.
- Wear respiratory protection if ventilation is inadequate or if there is a risk of dust/aerosol exposure.
- Ensure eyewash stations and safety showers are available in the workplace.
- Dispose of contents and container in accordance with local, regional, national, and institutional regulations.
- Do not dispose of down drains or into the environment.
First Aid / Accidental Release
- In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- In case of skin contact, wash with plenty of soap and water.
- If inhaled, move to fresh air and keep at rest in a position comfortable for breathing.
- If swallowed, rinse mouth. Do NOT induce vomiting.
- Seek medical attention if irritation persists or symptoms develop, following institutional procedures.
- Evacuate personnel to safe areas.
- Avoid dust or aerosol generation.
- Ensure adequate ventilation.
- Wear appropriate personal protective equipment (PPE).
Firefighting / Stability
- Use extinguishing media appropriate for the surrounding fire.
- Do not use a direct water stream on burning material.
- Wear self-contained breathing apparatus (SCBA) and full protective gear for firefighting.
- Keep containers cool with water spray.
- Considered stable under recommended storage conditions.
- Avoid strong oxidizing agents and strong bases.
- May decompose under fire conditions, producing hazardous fumes.
Physical and Chemical Reference
Appearance
white crystalline solid
Catalog reference value; verify against supplier SDS before use.
Physical State
solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
200.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
380.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.8 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
slightly soluble
Catalog reference value; verify against supplier SDS before use.
Flash Point
200.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated very low; unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
400.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
291899
Preliminary catalog cue; verify before compliance decisions.
HS Code
291899
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.