MolGraphRequest Quote
CAS 10037-31-7Preliminary Safety ReferenceNot a supplier-issued SDSSupplier SDS by request

CAS 10037-31-7 Safety Reference and Supplier SDS Request

Dimethyl 4-methyl-2,3-quinolinedicarboxylate

Back to CAS detail

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Documentation status

Preliminary safety reference

Available

Supplier-issued SDS

Available by request

COA

Available by RFQ / lot confirmation

Transport classification

Requires shipment review

Identity

CAS Number

10037-31-7

Chemical name

Dimethyl 4-methyl-2,3-quinolinedicarboxylate

Molecular formula

C14H13NO4

Molecular weight

259.26 g/mol

Synonyms

2,3-dimethyl 4-methylquinoline-2,3-dicarboxylate; 2,3-Quinolinedicarboxylic acid, 4-methyl-, 2,3-dimethyl ester; 4-METHYL-QUINOLINE-2,3-DICARBOXYLIC ACID DIMETHYL ESTER; 2,3-Quinolinedicarboxylic acid, 4-methyl-, dimethyl ester; 2,3-dimethyl4-methylquinoline-2,3-dicarboxylate

InChIKey

DDGYJSFQHGMAKZ-UHFFFAOYSA-N

PubChem CID

4314285

Hazard / GHS Reference

Signal word

Warning

Catalog reference cue; confirm supplier documentation before use.

Hazard statements

H302, H315, H319, H335

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Closed. Dry. Store in a well-ventilated area. Recommended storage conditions: Sealed and dry, at room temperature
  • Use a P95 (US) or P1 (EU) particulate respirator if exposed to hazardous environments. For higher level of protection, use OV/AG/P99 (US) or ABEK-P2 (EU) gas cartridges. Respirators and parts must be tested and approved by government standards such as NIOSH (US) or CEN (EU).
  • The remaining and non-recyclable solution should be handed over to a licensed company for disposal. Contact a professional institution with a waste disposal license to handle this substance. Combust the contaminated packaging in a chemical incinerator with combustion and washing functions. Contaminated packaging should be disposed of as unused product.

First Aid / Accidental Release

  • Do not give anything to an unconscious person. Rinse mouth with water. Consult a doctor.
  • If inhaled, move the person to fresh air. If breathing stops, perform artificial respiration. Consult a doctor.
  • Rinse with plenty of water for at least 15 minutes and consult a doctor.
  • Wash with soap and plenty of water. Consult a doctor.
  • Do not generate dust when collecting and disposing. Sweep and shovel up. Place in a suitable closed container for disposal.
  • Use personal protective equipment and emergency procedures. Avoid dust generation. Avoid inhalation of vapors, mists or gases. Ensure adequate ventilation. Evacuate personnel to a safe area. Avoid inhalation of dust. See
  • Do not allow the product to enter drains.
  • The remaining and non-recyclable solution should be handed over to a licensed company for disposal. Contact a professional institution with a waste disposal license to handle this substance. Combust the contaminated packaging in a chemical incinerator with combustion and washing functions. Contaminated packaging should be disposed of as unused product.

Firefighting / Stability

  • Wear a self-contained breathing apparatus for firefighting if necessary.

Physical and Chemical Reference

XLogP

2.6

Catalog reference value; verify against supplier SDS before use.

Transport / Shipment Review

Shipment review

Shipment details require review before fulfillment.

Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.