MolGraphRequest Quote
CAS 1008512-23-9Preliminary Safety ReferenceNot a supplier-issued SDSSupplier SDS by request

CAS 1008512-23-9 Safety Reference and Supplier SDS Request

Fmoc-l-lys(boc2-aoa)-oh

Back to CAS detail

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Documentation status

Preliminary safety reference

Available

Supplier-issued SDS

Available by request

COA

Available by RFQ / lot confirmation

Transport classification

Requires shipment review

Identity

CAS Number

1008512-23-9

Chemical name

Fmoc-l-lys(boc2-aoa)-oh

Molecular formula

C33H43N3O10

Molecular weight

641.7 g/mol

Synonyms

Nalpha-Fmoc-Nepsilon-bis(Boc-aminooxy)acetamido-L-Lysine; (S)-14-((((9H-Fluoren-9-yl)methoxy)carbonyl)amino)-5-(tert-butoxycarbonyl)-2,2-dimethyl-4,8-dioxo-3,6-dioxa-5,9-diazapentadecan-15-oic acid; (2S)-6-[[2-[bis(tert-butoxycarbonyl)amino]oxyacetyl]amino]-2-(9H-fluoren-9-ylmethoxycarbonylamino)hexanoic acid; N-alpha-(9-Fluorenylmethyloxycarbonyl)-N-epsilon-[bis(t-butyloxycarbonyl)-aminooxy-acetyl]-L-lysine (Fmoc-L-Lys(Boc2-Aoa)-OH)

InChIKey

ALGUUBFSURDOAV-SANMLTNESA-N

PubChem CID

24787212

Hazard / GHS Reference

Signal word

Danger

Catalog reference cue; confirm supplier documentation before use.

Hazard statements

H228, H315, H319

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Including any incompatibility. Close tightly. Dry. Store in a well-ventilated area. Recommended storage conditions: Sealed and dry, 2-8°C
  • Use a P95 (US) or P1 (EU UK 143) particulate respirator if exposed to hazardous environments. For higher level of protection, use an OV/AG/P99 (US) or ABEK-P2 (EU UK 143) gas filter. Respirators and parts must be tested and approved by government standards such as NIOSH (US) or CEN (EU).
  • The remaining and non-recyclable solution should be handed over to a licensed company for disposal. Contact a professional institution with a waste disposal license to handle this substance. Combust the contaminated packaging in a chemical incinerator with combustion and washing functions. Contaminated packaging should be disposed of as unused product.

First Aid / Accidental Release

  • Do not give anything to an unconscious person. Rinse mouth with water. Consult a physician.
  • If inhaled, move the person to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
  • Rinse with plenty of water for at least 15 minutes and consult a physician.
  • Wash with soap and plenty of water. Consult a physician.
  • Do not generate dust when collecting and disposing. Sweep and shovel. Place in a suitable closed container for disposal.
  • Use personal protective equipment. Avoid dust generation. Avoid inhalation of vapors, mists or gases. Ensure adequate ventilation. Evacuate personnel to a safe area. Avoid inhalation of dust. See
  • Do not allow the product to enter drains.
  • The remaining and non-recyclable solution should be handed over to a licensed company for disposal. Contact a professional institution with a waste disposal license to handle this substance. Combust the contaminated packaging in a chemical incinerator with combustion and washing functions. Contaminated packaging should be disposed of as unused product.

Firefighting / Stability

  • Use self-contained breathing apparatus if necessary.
  • and reaction activity
  • carbon monoxide, carbon dioxide, nitrogen oxides

Physical and Chemical Reference

XLogP

5.2

Catalog reference value; verify against supplier SDS before use.

Transport / Shipment Review

Shipment review

Shipment details require review before fulfillment.

Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.