MolGraph
CAS 1209347-26-1Not a supplier-issued SDS

Preliminary Safety Reference

Benzyl 6-[(ethylamino)carbonyl]-4-(trifluoromethyl)-2-pyridinecarboxylate

Back to CAS detail

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Identity

CAS Number

1209347-26-1

Chemical name

Benzyl 6-[(ethylamino)carbonyl]-4-(trifluoromethyl)-2-pyridinecarboxylate

Molecular formula

C17H15F3N2O3

Molecular weight

352.31 g/mol

Synonyms

benzyl6-(ethylcarbamoyl)-4-(trifluoromethyl)pyridine-2-carboxylate

InChIKey

BVXQVLHNSPPYPZ-UHFFFAOYSA-N

PubChem CID

45588586

Hazard / GHS Reference

GHS Pictograms

GHS07

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Handle in a well-ventilated area or under a fume hood.
  • Avoid contact with skin, eyes, and clothing.
  • Avoid formation of dust and aerosols.
  • Keep container tightly closed in a dry and well-ventilated place.
  • Store away from incompatible materials.
  • Wear safety glasses with side-shields for eye protection.
  • Wear a lab coat and chemical-resistant gloves (e.g., nitrile, neoprene) for skin protection.
  • Ensure adequate ventilation or use a fume hood to control airborne levels.
  • Use general protective clothing to prevent skin exposure.

First Aid / Accidental Release

  • If exposed, seek medical attention if irritation or symptoms persist.
  • In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes.
  • In case of skin contact, wash off with soap and plenty of water.
  • If inhaled, move to fresh air. If not breathing, give artificial respiration.
  • If swallowed, rinse mouth with water. Do NOT induce vomiting.
  • Ensure adequate ventilation during clean-up.
  • Wear appropriate personal protective equipment (PPE).
  • Avoid dust formation and do not breathe dust.
  • Sweep up spilled material and place in a suitable container for disposal.

Firefighting / Stability

  • Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
  • Do not use a solid water stream as it may spread the fire.
  • Wear self-contained breathing apparatus for firefighting if necessary.
  • Cool unopened containers with water spray.
  • Hazardous combustion products may include carbon oxides, nitrogen oxides, and hydrogen fluoride.
  • Stable under recommended storage conditions.
  • No hazardous reactions known under normal conditions of use.
  • Avoid strong oxidizing agents.
  • Avoid exposure to heat and incompatible materials.

Physical and Chemical Reference

Appearance

White to off-white solid

Catalog reference value; verify against supplier SDS before use.

Physical State

Solid

Catalog reference value; verify against supplier SDS before use.

Melting Point

110.0 °C

Catalog reference value; verify against supplier SDS before use.

Boiling Point

420.0 °C

Catalog reference value; verify against supplier SDS before use.

Density

1.3 g/cm³

Catalog reference value; verify against supplier SDS before use.

Water Solubility

Very slightly soluble

Catalog reference value; verify against supplier SDS before use.

Flash Point

220.0 °C

Catalog reference value; verify against supplier SDS before use.

Vapor Pressure

Estimated very low; unit not specified

Catalog reference value; verify against supplier SDS before use.

Autoignition Temp

380.0 °C

Catalog reference value; verify against supplier SDS before use.

Transport / Shipment Review

HS6

293339

Preliminary catalog cue; verify before compliance decisions.

HS Code

2933399000

Source: catalog inference.

GHS Pictograms

GHS07

Preliminary catalog cue; verify before compliance decisions.

Compliance

standard-ruo

Preliminary catalog cue; verify before compliance decisions.

Registration Status

DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending

Registration values are catalog reference status cues and may require jurisdiction-specific review.

Shipment review

Shipment details require review before fulfillment.

Preliminary catalog cue; verify before compliance decisions.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.