Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
1257649-56-1
Chemical name
2-(4-Iodophenyl)-6-methyl-1,3,6,2-dioxazaborocane-4,8-dione
Molecular formula
C11H11BINO4
Molecular weight
358.93 g/mol
Synonyms
4-Iodophenylboronic acid MIDA ester; 4-Iodophenylboronic acid MIDA ester, 97%
InChIKey
KIKNJEGAWBNFLW-UHFFFAOYSA-N
PubChem CID
71310644
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or under a chemical fume hood.
- Avoid contact with skin, eyes, and clothing.
- Keep container tightly closed when not in use.
- Store in a cool, dry, and well-ventilated place.
- Protect from light and moisture to maintain product integrity.
- Wear a laboratory coat or protective clothing.
- Use compatible chemical-resistant gloves.
- Wear safety glasses with side-shields or a face shield.
- Ensure adequate ventilation or use a fume hood.
First Aid / Accidental Release
- If inhaled, move person to fresh air and keep comfortable for breathing.
- In case of skin contact, wash thoroughly with soap and water.
- In case of eye contact, rinse cautiously with water for several minutes.
- If swallowed, rinse mouth with water if the person is conscious.
- Seek medical attention if irritation or symptoms persist.
- Avoid dust formation during cleanup.
- Ensure adequate ventilation in the area of the spill.
- Wear appropriate personal protective equipment, including gloves and eye protection.
- Sweep up spilled material and place in a suitable container for disposal.
Firefighting / Stability
- Use water spray, dry chemical, carbon dioxide, or appropriate foam for extinguishment.
- Wear self-contained breathing apparatus (SCBA) and full protective gear.
- Cool unopened containers with water spray if exposed to fire.
- Prevent fire-fighting water from entering drains or water courses.
- Evacuate personnel to a safe area.
- Stable under recommended storage and handling conditions.
- May be sensitive to moisture and air.
- Avoid strong oxidizing agents.
- Avoid strong acids and strong bases.
Physical and Chemical Reference
Appearance
white solid
Catalog reference value; verify against supplier SDS before use.
Physical State
solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
110.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
348.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.7 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
3.31 × 10⁻⁴ mol/L
Catalog reference value; verify against supplier SDS before use.
Flash Point
165.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated very low; unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
410.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
293190
Preliminary catalog cue; verify before compliance decisions.
HS Code
293190
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.