Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
1268521-89-6
Chemical name
7-chloro-2-methyl-5-(trifluoromethyl)-1H-pyrrolo[3,2-b]pyridine-6-carbonitrile
Molecular formula
C10H5ClF3N3
Molecular weight
259.61 g/mol
Synonyms
7-Chloro-2-methyl-5-(trifluoromethyl)-4-azaindole-6-carbonitrile; WZG0055; E87274
InChIKey
AXFXCWZHDRADDI-UHFFFAOYSA-N
PubChem CID
138754216
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or under a fume hood.
- Avoid contact with skin, eyes, and clothing.
- Avoid formation of dust and aerosols.
- Store in a cool, dry place, away from incompatible materials.
- Keep container tightly closed when not in use.
- Wear a laboratory coat or protective clothing.
- Wear compatible chemical-resistant gloves.
- Wear safety goggles or a face shield.
- Ensure adequate ventilation or use respiratory protection if dust/aerosols are generated.
First Aid / Accidental Release
- If inhaled, move to fresh air. Seek medical attention if irritation persists.
- In case of skin contact, wash with soap and plenty of water. Seek medical attention if irritation develops.
- In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.
- If swallowed, rinse mouth with water. Do not induce vomiting. Seek medical attention.
- Evacuate personnel to safe areas.
- Avoid dust formation and breathing vapors, mist, or gas.
- Sweep up and shovel the spilled material.
- Place in suitable, closed containers for disposal.
- Ensure adequate ventilation in the spill area.
Firefighting / Stability
- Use dry chemical, carbon dioxide, water spray, or alcohol-resistant foam.
- Wear self-contained breathing apparatus for firefighting if necessary.
- Wear full protective firefighting gear.
- Keep containers cool with water spray if exposed to fire.
- Stable under recommended storage conditions.
- Avoid strong oxidizing agents.
- Avoid strong acids and strong bases.
- May decompose upon heating to produce hazardous fumes.
Physical and Chemical Reference
Appearance
White to off-white crystalline powder
Catalog reference value; verify against supplier SDS before use.
Physical State
Solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
180.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
380.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.4 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
Slightly soluble to insoluble
Catalog reference value; verify against supplier SDS before use.
Flash Point
210.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated very low; unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
450.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
293399
Preliminary catalog cue; verify before compliance decisions.
HS Code
293399
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.