CAS 136099-65-5 Safety Reference and Supplier SDS Request

• Keep container tightly closed and dry. Store in a well-ventilated place. Recommended storage conditions: nitrogen-purged, -20°C
• Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide suitable ventilation in areas where dust is generated. General fire protection measures.
• Dispose of remaining and non-recyclable solutions to a licensed company. Contact a professional organization with a waste disposal license to handle this substance. Burn in a chemical incinerator with post-combustion and washing capabilities if mixed with flammable solvents. Burn contaminated packaging. Contaminated packaging is to be disposed of as unused product.

• Do not give anything to an unconscious person. Rinse mouth with water. Consult a physician.
• If inhaled, move the victim to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
• Rinse with plenty of water for at least 15 minutes and consult a physician.
• Wash with soap and plenty of water. Consult a physician.
• Do not generate dust when collecting and disposing. Sweep and shovel up. Place in a suitable closed container for disposal.
• Use personal protective equipment. Avoid dust generation. Avoid inhalation of vapors, mists or gases. Ensure adequate ventilation. Evacuate personnel to a safe area. Avoid inhalation of dust. See
• Do not allow the product to enter drains.
• Dispose of remaining and non-recyclable solutions to a licensed company. Contact a professional organization with a waste disposal license to handle this substance. Burn in a chemical incinerator with post-combustion and washing capabilities if mixed with flammable solvents. Burn contaminated packaging. Contaminated packaging is to be disposed of as unused product.

• Use self-contained breathing apparatus if necessary.
• Reactivity
• Carbon monoxide, carbon dioxide, boron oxides, sulfides

Physical property reference values are not available in the current MolGraph catalog record.

• Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.