Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
1369138-62-4
Chemical name
3-Chloro-2-methyl-5-(trifluoromethyl)isonicotinic acid
Molecular formula
C8H5ClF3NO2
Molecular weight
239.58 g/mol
Synonyms
3-chloro-2-methyl-5-(trifluoromethyl)isonicotinicacid
InChIKey
XDEOMQZABRDQFL-UHFFFAOYSA-N
PubChem CID
57367890
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or fume hood.
- Avoid inhalation, ingestion, and skin/eye contact.
- Keep container tightly closed in a dry and well-ventilated place.
- Store away from incompatible materials.
- Ensure good industrial hygiene practices are followed.
- Use appropriate PPE such as a lab coat.
- Wear compatible chemical-resistant gloves.
- Use approved eye protection, such as safety goggles or a face shield.
- In case of insufficient ventilation, wear suitable respiratory protection.
First Aid / Accidental Release
- In case of inhalation, move to fresh air.
- For skin contact, wash thoroughly with soap and water.
- In case of eye contact, rinse cautiously with water for several minutes.
- If ingested, rinse mouth and seek medical attention if symptoms occur.
- Seek medical attention according to institutional procedures if irritation or symptoms persist.
- Avoid dust or aerosol generation during cleanup.
- Wear appropriate personal protective equipment.
- Contain spill and prevent further leakage or spillage if safe to do so.
- Collect spilled material using trained-lab procedures and place in a suitable container for disposal.
Firefighting / Stability
- Use extinguishing media appropriate for the surrounding fire.
- Do not use a direct water stream on burning material.
- Firefighters should wear self-contained breathing apparatus and full protective gear.
- Evacuate personnel to a safe area.
- This material is considered stable under recommended storage conditions.
- Avoid strong oxidizing agents and strong bases.
- Hazardous decomposition products may include carbon oxides, nitrogen oxides, hydrogen chloride, and hydrogen fluoride.
- No known hazardous reactions under normal conditions of use.
Physical and Chemical Reference
Appearance
White crystalline powder
Catalog reference value; verify against supplier SDS before use.
Physical State
Solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
170.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
320.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.5 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
Slightly soluble
Catalog reference value; verify against supplier SDS before use.
Flash Point
200.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated very low; unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
400.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
293339
Preliminary catalog cue; verify before compliance decisions.
HS Code
293339
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.