CAS 153261-83-7 Safety Reference and Supplier SDS Request

• Keep container tightly closed and dry. Store in a well-ventilated place. Recommended storage conditions: keep away from light, inert atmosphere, room temperature
• Avoid contact with skin and eyes. Avoid formation of dust and aerosol. Provide suitable ventilation in areas where dust is generated. General fire protection measures.
• Dispose of remaining and non-recyclable solutions to a licensed company. Contact a professional agency with waste disposal license to handle this substance. Dissolve or mix with flammable solvents and burn in a chemical incinerator with post-combustion and washing functions. Contaminated packaging is to be disposed of as unutilized product.

• Do not give anything to an unconscious person. Rinse mouth with water. Consult a physician.
• If inhaled, move the person to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
• Rinse with plenty of water for at least 15 minutes and consult a physician.
• Wash with soap and plenty of water. Consult a physician.
• Do not generate dust when collecting and disposing. Sweep and shovel up. Place in a suitable closed container for disposal.
• Use personal protective equipment. Avoid dust generation. Avoid inhalation of vapors, mists or gases. Ensure adequate ventilation. Evacuate personnel to a safe area. Avoid inhalation of dust. See
• Do not allow the product to enter drains.
• Dispose of remaining and non-recyclable solutions to a licensed company. Contact a professional agency with waste disposal license to handle this substance. Dissolve or mix with flammable solvents and burn in a chemical incinerator with post-combustion and washing functions. Contaminated packaging is to be disposed of as unutilized product.

• Use self-contained breathing apparatus if necessary.
• Reactivity and reaction
• Carbon monoxide, carbon dioxide, metal oxides, sulfides

Physical property reference values are not available in the current MolGraph catalog record.

• Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.