Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
1956307-47-3
Chemical name
Methyl 2-(4-ethoxy-2,6-difluorobenzyl)-2H-indazole-3-carboxylate
Molecular formula
C18H16F2N2O3
Molecular weight
346.3 g/mol
Synonyms
methyl 2-[(4-ethoxy-2,6-difluorophenyl)methyl]-2H-indazole-3-carboxylate; W11949; Methyl2-(4-ethoxy-2,6-difluorobenzyl)-2H-indazole-3-carboxylate
InChIKey
RLGVKRDMCLZCDV-UHFFFAOYSA-N
PubChem CID
118798831
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or under a chemical fume hood.
- Avoid contact with skin, eyes, and clothing. Avoid ingestion and inhalation.
- Keep container tightly closed in a dry, cool, and well-ventilated place.
- Store away from incompatible materials such as strong oxidizing agents.
- Wear a lab coat or other protective clothing to prevent skin exposure.
- Use compatible chemical-resistant gloves (e.g., nitrile) for hand protection.
- Wear eye protection such as safety goggles or a face shield.
- Ensure adequate ventilation. If ventilation is insufficient, use appropriate respiratory protection.
- Dispose of contents and container in accordance with local, regional, national, and international regulations.
First Aid / Accidental Release
- In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally.
- For skin contact, wash thoroughly with soap and water. Remove contaminated clothing and shoes.
- If inhaled, move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
- If swallowed, rinse mouth with water. Do NOT induce vomiting.
- Seek medical attention if irritation persists or symptoms develop.
- Evacuate personnel to safe areas and ensure adequate ventilation.
- Avoid dust formation and breathing vapors, mist, or gas.
- Wear appropriate personal protective equipment during cleanup.
- Sweep up or absorb with inert material and place in a suitable disposal container.
Firefighting / Stability
- Use water spray, dry chemical, carbon dioxide, or alcohol-resistant foam for extinction.
- Wear self-contained breathing apparatus and full protective gear for firefighting.
- Keep containers cool with water spray to prevent rupture.
- Prevent runoff from fire control from entering waterways or sewers.
- Stable under recommended storage conditions.
- May react with strong oxidizing agents.
- Avoid strong acids and strong bases.
- Avoid conditions such as excessive heat, open flames, sparks, and incompatible materials.
Physical and Chemical Reference
Appearance
White to off-white crystalline powder
Catalog reference value; verify against supplier SDS before use.
Physical State
Solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
120.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.3 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
Slightly soluble
Catalog reference value; verify against supplier SDS before use.
Flash Point
195.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated very low; unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
380.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
293399
Preliminary catalog cue; verify before compliance decisions.
HS Code
293399
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.