Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
2060058-82-2
Chemical name
3-Ethyl-7-(trifluoromethyl)-1H-indole-2-carboxylic acid
Molecular formula
C12H10F3NO2
Molecular weight
257.21 g/mol
Synonyms
3-Ethyl-7-(trifluoromethyl)-1H-indole-2-carboxylicacid
InChIKey
XMRJOHBIOJFAMX-UHFFFAOYSA-N
PubChem CID
125454703
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or under a fume hood.
- Avoid contact with skin, eyes, and clothing.
- Avoid formation of dust and aerosols.
- Store in a cool, dry place, away from incompatible materials.
- Keep container tightly closed when not in use.
- Wear safety glasses with side-shields for eye protection.
- Wear a lab coat and compatible protective gloves for skin protection.
- Use respiratory protection if ventilation is inadequate or dust/aerosol is generated.
- Ensure adequate ventilation or use local exhaust ventilation.
First Aid / Accidental Release
- If inhaled, move to fresh air and keep at rest in a comfortable position.
- In case of skin contact, wash thoroughly with soap and water.
- In case of eye contact, rinse cautiously with water for several minutes.
- If swallowed, rinse mouth with water and do NOT induce vomiting.
- Seek medical attention if irritation persists or symptoms develop.
- Ensure adequate ventilation during cleanup.
- Wear appropriate personal protective equipment.
- Avoid dust formation and do not breathe dust.
- Sweep up spilled material and place in a suitable container for disposal.
Firefighting / Stability
- Use water spray, dry chemical, foam, or carbon dioxide for extinction.
- Wear self-contained breathing apparatus for firefighting if necessary.
- Wear full protective gear to prevent contact with skin and eyes.
- May emit toxic fumes under fire conditions.
- Keep containers cool with water spray.
- Stable under recommended storage conditions.
- No hazardous reactions known under normal conditions of use.
- Avoid strong oxidizing agents and strong bases.
- Avoid exposure to heat, flames, and sparks.
Physical and Chemical Reference
Appearance
White crystalline solid
Catalog reference value; verify against supplier SDS before use.
Physical State
Solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
200.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
350.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.45 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
Slightly soluble
Catalog reference value; verify against supplier SDS before use.
Flash Point
200.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated very low; unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
350.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
293399
Preliminary catalog cue; verify before compliance decisions.
HS Code
293399
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.