MolGraphRequest Quote
CAS 50982-12-2Preliminary Safety ReferenceNot a supplier-issued SDSSupplier SDS by request

CAS 50982-12-2 Safety Reference and Supplier SDS Request

Rutheniumdichlor[1,2,5,6-\h)-1,5-cyclooctadien]-, homopolymer

Back to CAS detail

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Documentation status

Preliminary safety reference

Available

Supplier-issued SDS

Available by request

COA

Available by RFQ / lot confirmation

Transport classification

Requires shipment review

Identity

CAS Number

50982-12-2

Chemical name

Rutheniumdichlor[1,2,5,6-\h)-1,5-cyclooctadien]-, homopolymer

Molecular formula

C8H12Cl2Ru

Molecular weight

280.2 g/mol

Synonyms

Rutheniumdichlor(1,2,5,6-\h)-1,5-cyclooctadien)-, homopolymer; Dichloro(1,5-cyclooctadiene)ruthenium(II); Dichloro(cycloocta-1,5-diene)ruthenium(II); Dichloro(cycloocta-1.5-diene)ruthenium(II); (1,5-Cyclooctadiene)ruthenium chloride; Dichloro(1,5-cyclooctadien)ruthenium(II), polymer

InChIKey

DMRVBCXRFYZCPR-UHFFFAOYSA-L

PubChem CID

11514661

Hazard / GHS Reference

Signal word

Warning

Catalog reference cue; confirm supplier documentation before use.

Hazard statements

H302, H315, H319, H335

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Keep container tightly closed and dry. Store in a well-ventilated place. Recommended storage conditions: nitrogen-purged, room temperature
  • Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide suitable ventilation in areas where dust is generated. General fire protection measures.
  • Use a P95 (US) or P1 (EU UK 143) particulate respirator if exposed to harmful environments. For higher level of protection, use OV/AG/P99 (US) or ABEK-P2 (EU UK 143) cartridges. Respirators must be tested and approved by government standards such as NIOSH (US) or CEN (EU).
  • Residual and non-recyclable solutions should be handed over to a licensed company for disposal. Contact a professional agency with a waste disposal license to handle this substance. Burn contaminated packaging in a chemical incinerator with post-combustion and washing capabilities. Contaminated packaging should be disposed of as unutilized product.

First Aid / Accidental Release

  • Do not give anything to an unconscious person. Rinse mouth with water. Consult a physician.
  • If inhaled, move the person to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
  • Rinse with plenty of water for at least 15 minutes and consult a physician.
  • Wash with soap and plenty of water. Consult a physician.
  • Do not generate dust when collecting and disposing. Sweep and shovel up. Place in a suitable closed container for disposal.
  • Use personal protective equipment. Avoid dust generation. Avoid inhalation of vapors, mists or gases. Ensure adequate ventilation. Evacuate personnel to a safe area. Avoid inhalation of dust. See
  • Do not allow the product to enter drains.
  • Residual and non-recyclable solutions should be handed over to a licensed company for disposal. Contact a professional agency with a waste disposal license to handle this substance. Burn contaminated packaging in a chemical incinerator with post-combustion and washing capabilities. Contaminated packaging should be disposed of as unutilized product.

Firefighting / Stability

  • Reactivity and stability
  • Carbon monoxide, carbon dioxide, hydrogen chloride

Physical and Chemical Reference

Physical property reference values are not available in the current MolGraph catalog record.

Transport / Shipment Review

Shipment review

Shipment details require review before fulfillment.

Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.