MolGraphRequest Quote
CAS 646-97-9Preliminary Safety ReferenceNot a supplier-issued SDSSupplier SDS by request

CAS 646-97-9 Safety Reference and Supplier SDS Request

4-Penten-2-ol, 1,1,1-trifluoro-2-(trifluoromethyl)-

Back to CAS detail

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Documentation status

Preliminary safety reference

Available

Supplier-issued SDS

Available by request

COA

Available by RFQ / lot confirmation

Transport classification

Requires shipment review

Identity

CAS Number

646-97-9

Chemical name

4-Penten-2-ol, 1,1,1-trifluoro-2-(trifluoromethyl)-

Molecular formula

C6H6F6O

Molecular weight

208.1 g/mol

Synonyms

2-allylhexafluoroisopropanol; 1,1,1-Trifluoro-2-(trifluoromethyl)-4-penten-2-ol; BTHB; allylhexafluoroisopropanol; allylhexafluoro-isopropanol; 1,1-bis(trifluoromethyl)-3-butenol; 1,1-bis (trifluoromethyl) -3-butenol; 4,4-bis(trifluoromethyl)-4-hydroxy-1-butene; 4,4-bis (trifluoromethyl)-4-hydroxy-1-butene; 1,1,1-trifluoro-2-trifluoromethyl-4-penten-2-ol; 1,1,1-trifluoro-2-trifluoromethyl-pent-4-ene-2-ol; 4-Penten-2-ol,1,1-trifluoro-2-(trifluoromethyl)-

InChIKey

VHSCQANAKTXZTG-UHFFFAOYSA-N

PubChem CID

328870

Hazard / GHS Reference

Signal word

Danger

Catalog reference cue; confirm supplier documentation before use.

Hazard statements

H226, H318

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Keep container tightly closed and dry. Store in a well-ventilated place. Recommended storage conditions: nitrogen-purged, room temperature
  • If exposed to a harmful environment, use a P95 (US) or P1 (EU UK 143) particulate respirator. For higher level of protection, use an OV/AG/P99 (US) or ABEK-P2 (EU UK 143) gas filter. Respirators must be tested and approved by government standards such as NIOSH (US) or CEN (EU).

First Aid / Accidental Release

  • Do not give anything to an unconscious person. Rinse mouth with water. Consult a physician.
  • If inhaled, move the patient to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
  • Rinse with plenty of water for at least 15 minutes and consult a physician.
  • Wash with soap and plenty of water. Consult a physician.
  • Do not generate dust when collecting and disposing. Sweep and shovel up. Place in a suitable closed container for disposal.
  • Use personal protective equipment and emergency procedures. Avoid dust generation. Avoid inhaling vapors, mists or gases. Ensure adequate ventilation. Evacuate personnel to a safe area. Avoid inhaling dust. For personal protection, see
  • Do not allow the product to enter drains.

Firefighting / Stability

  • If necessary, wear a self-contained breathing apparatus for firefighting.
  • Reactivity and stability

Physical and Chemical Reference

XLogP

2.8

Catalog reference value; verify against supplier SDS before use.

Transport / Shipment Review

Shipment review

Shipment details require review before fulfillment.

Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.