MolGraphRequest Quote
CAS 915706-90-0Preliminary Safety ReferenceNot a supplier-issued SDSSupplier SDS by request

CAS 915706-90-0 Safety Reference and Supplier SDS Request

Sieber amide resin

Back to CAS detail

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Documentation status

Preliminary safety reference

Available

Supplier-issued SDS

Available by request

COA

Available by RFQ / lot confirmation

Transport classification

Requires shipment review

Identity

CAS Number

915706-90-0

Chemical name

Sieber amide resin

Molecular formula

C36H29NO4

Molecular weight

539.6 g/mol

Synonyms

Fmoc-Sieber-PS resin; Sieber Amide Resins; SIEBERAMIDERESIN; N-Fmoc-3-[(4-methylbenzyl)oxy]-9H-xanthen-9-amine; SIEBER AMIDE RESIN (100-200 MESH,1% DVB,0.3-0.8MMOL/G); 9-Fmoc-aminoxanthen-3-yloxy polystyrene resin (0.6-0.8 meq/g, 100-200 mesh)

InChIKey

RDRBIXSNGAYLPT-UHFFFAOYSA-N

PubChem CID

118459230

Hazard / GHS Reference

Signal word

Warning

Catalog reference cue; confirm supplier documentation before use.

Hazard statements

H302

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Use a P95 (US) or P1 (EU UK 143) particulate respirator if exposed to hazardous environments. For higher level of protection, use an OV/AG/P99 (US) or ABEK-P2 (EU UK 143) gas filter. Respirators must be tested and approved by government standards such as NIOSH (US) or CEN (EU). Do not allow the product to enter drains.
  • Dispose of remaining and non-recyclable solutions to a licensed company. Contact a professional agency with a waste disposal license to handle this substance. Burn contaminated packaging in a chemical incinerator with post-combustion and scrubbing capabilities. Contaminated packaging is to be disposed of as unused product.

First Aid / Accidental Release

  • Do not give anything to an unconscious person. Rinse mouth with water. Consult a physician.
  • If inhaled, move the person to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
  • Rinse with plenty of water for at least 15 minutes and consult a physician.
  • Wash with soap and plenty of water. Consult a physician.
  • Use personal protective equipment. Avoid dust generation. Avoid inhalation of vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to a safe area. Avoid inhalation of dust. See
  • Do not allow the product to enter drains.
  • Dispose of remaining and non-recyclable solutions to a licensed company. Contact a professional agency with a waste disposal license to handle this substance. Burn contaminated packaging in a chemical incinerator with post-combustion and scrubbing capabilities. Contaminated packaging is to be disposed of as unused product.

Firefighting / Stability

  • and reactivity

Physical and Chemical Reference

XLogP

7.7

Catalog reference value; verify against supplier SDS before use.

Transport / Shipment Review

Shipment review

Shipment details require review before fulfillment.

Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.