MolGraphRequest Quote
CAS 929634-33-3Preliminary Safety ReferenceNot a supplier-issued SDSSupplier SDS by request

CAS 929634-33-3 Safety Reference and Supplier SDS Request

ADAMTS-5 inhibitor

Back to CAS detail

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Documentation status

Preliminary safety reference

Available

Supplier-issued SDS

Available by request

COA

Available by RFQ / lot confirmation

Transport classification

Requires shipment review

Identity

CAS Number

929634-33-3

Chemical name

ADAMTS-5 inhibitor

Molecular formula

C16H11ClF3N3OS3

Molecular weight

449.9 g/mol

Synonyms

5-((5-((4-Chlorobenzyl)thio)-1-methyl-3-(trifluoromethyl)-1H-pyrazol-4-yl)methylene)-2-thioxothiazolidin-4-one; (Z)-5-((5-(4-chlorobenzylthio)-1-methyl-3-(trifluoromethyl)-1H-pyrazol-4-yl)methylene)-2-thioxothiazolidin-4-one; C16H11ClF3N3OS3; (5Z)-5-({5-[(4-chlorobenzyl)sulfanyl]-1-methyl-3-(trifluoromethyl)-1H-pyrazol-4-yl}methylidene)-2-sulfanylidene-1,3-thiazolidin-4-one; (5Z)-5-[(5-{[(4-chlorophenyl)methyl]sulfanyl}-1-methyl-3-(trifluoromethyl)pyrazol-4-yl)methylidene]-2-sulfanylidene-1,3-thiazolidin-4-one; (5Z)-5-[[5-[(4-chlorophenyl)methylsulfanyl]-1-methyl-3-(trifluoromethyl)pyrazol-4-yl]methylene]-2-thioxo-thiazolidin-4-one; (Z)-5-((5-((4-chlorobenzyl)thio)-1-methyl-3-(trifluoromethyl)-1H-pyrazol-4-yl)methylene)-2-thioxothiazolidin-4-one; 5-((5-(4-chlorobenzylthio)-1-methyl-3-(trifluoromethyl)-1H-pyrazol-4-yl)methylene)-2-thioxothiazolidin-4-one

InChIKey

CVYPRDPBCXSVBN-WDZFZDKYSA-N

PubChem CID

16664963

Hazard / GHS Reference

Signal word

Warning

Catalog reference cue; confirm supplier documentation before use.

Hazard statements

H302, H315, H319

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Use a P95 (US) or P1 (EU UK 143) particulate respirator if exposed to harmful environments. For higher level protection, use an OV/AG/P99 (US) or ABEK-P2 (EU UK 143) gas filter. Respirators must be tested and approved by government standards such as NIOSH (US) or CEN (EU). Do not allow the product to enter the sewer.
  • The product, remaining and non-recyclable solutions should be handed over to a licensed company for disposal. Contact a professional agency with a waste disposal license to handle this substance. Burn contaminated packaging in a chemical incinerator with post-combustion and washing capabilities. Contaminated packaging should be disposed of as unutilized product.

First Aid / Accidental Release

  • Do not give anything to an unconscious person. Rinse mouth with water. Consult a physician.
  • If inhaled, move the patient to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
  • Rinse with plenty of water for at least 15 minutes and consult a physician.
  • Wash with soap and plenty of water. Consult a physician.
  • Do not generate dust when collecting and disposing. Sweep and shovel up. Place in a suitable closed container for disposal.
  • Use personal protective equipment and emergency procedures. Avoid dust generation. Avoid inhaling vapors, mists or gases. Ensure adequate ventilation. Evacuate personnel to a safe area. Avoid inhaling dust. See
  • Do not allow the product to enter the sewer.
  • The product, remaining and non-recyclable solutions should be handed over to a licensed company for disposal. Contact a professional agency with a waste disposal license to handle this substance. Burn contaminated packaging in a chemical incinerator with post-combustion and washing capabilities. Contaminated packaging should be disposed of as unutilized product.

Firefighting / Stability

  • Reactivity and stability
  • Carbon monoxide, carbon dioxide, hydrogen chloride, hydrogen fluoride, nitrogen oxides, sulfur oxides

Physical and Chemical Reference

XLogP

5

Catalog reference value; verify against supplier SDS before use.

Transport / Shipment Review

Shipment review

Shipment details require review before fulfillment.

Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.