CAS 929887-16-1 Safety Reference and Supplier SDS Request

• Keep container tightly closed and dry. Store in a well-ventilated place.
• Avoid contact with skin and eyes. Avoid generating dust and aerosols. Provide appropriate ventilation in areas where dust is generated. General fire protection measures.
• Use a P95 (US) or P1 (EU UK 143) particulate respirator if exposed to harmful environments. For higher level of protection, use an OV/AG/P99 (US) or ABEK-P2 (EU UK 143) gas filter. Respirators must be tested and approved by government standards such as NIOSH (US) or CEN (EU).
• The product, remaining and non-recyclable solutions should be handed over to a licensed company for disposal. Contact a professional agency with a waste disposal license to handle this substance. Burn contaminated packaging in a chemical incinerator with post-combustion and washing functions. Contaminated packaging should be disposed of as unutilized product.

• Do not give anything to an unconscious person. Rinse mouth with water. Consult a physician.
• If inhaled, move the patient to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
• Rinse with plenty of water for at least 15 minutes and consult a physician.
• Wash with soap and plenty of water. Consult a physician.
• Do not generate dust when collecting and disposing. Sweep and shovel up. Place in a suitable closed container for disposal.
• Use personal protective equipment and emergency procedures. Avoid dust generation. Avoid inhaling vapors, mists or gases. Ensure adequate ventilation. Evacuate personnel to a safe area. Avoid inhaling dust. See
• Do not allow the product to enter drains.
• The product, remaining and non-recyclable solutions should be handed over to a licensed company for disposal. Contact a professional agency with a waste disposal license to handle this substance. Burn contaminated packaging in a chemical incinerator with post-combustion and washing functions. Contaminated packaging should be disposed of as unutilized product.

• Reactivity and stability
• Carbon monoxide, carbon dioxide, boron oxides, hydrogen chloride, silicon oxides

Physical property reference values are not available in the current MolGraph catalog record.

• Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.