MolGraphRequest Quote
CAS 960-71-4Preliminary Safety ReferenceNot a supplier-issued SDSSupplier SDS by request

CAS 960-71-4 Safety Reference and Supplier SDS Request

Triphenylborane

Back to CAS detail

Preliminary reference disclaimer

This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.

Documentation status

Preliminary safety reference

Available

Supplier-issued SDS

Available by request

COA

Available by RFQ / lot confirmation

Transport classification

Requires shipment review

Identity

CAS Number

960-71-4

Chemical name

Triphenylborane

Molecular formula

C18H15B

Molecular weight

242.1 g/mol

Synonyms

Triphenylboron; Borane, triphenyl-; Triphenylborine; Triphenyboron; boron triphenyl; Borine, triphenyl; triphenyl boron; triphenyl-borane; BORINE, TRIPHENYL-; B(C6H5)3; Triphenylborane, powder, <2% H2O; InChI=1/C18H15B/c1-4-10-16(11-5-1)19(17-12-6-2-7-13-17)18-14-8-3-9-15-18/h1-15

InChIKey

MXSVLWZRHLXFKH-UHFFFAOYSA-N

PubChem CID

70400

Hazard / GHS Reference

Signal word

Danger

Catalog reference cue; confirm supplier documentation before use.

Hazard statements

H228

Catalog reference cue; confirm supplier documentation before use.

Handling & PPE

  • Keep container tightly closed and dry. Store in a well-ventilated place. Recommended storage conditions: nitrogen-purged, 2-8°C
  • Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide suitable ventilation in areas where dust is generated. General fire protection measures.
  • If exposed to hazardous environments, use a P95 (US) or P1 (EU UK 143) particulate respirator. For higher level of protection, use an OV/AG/P99 (US) or ABEK-P2 (EU UK 143) gas filter. Respirators must be tested and approved by government standards such as NIOSH (US) or CEN (EU).
  • The product Remaining solutions and non-recyclable solutions should be handed over to a licensed company for disposal. Contact a professional organization with a waste disposal license to handle this substance. Burn contaminated packaging in a chemical incinerator with post-combustion and washing capabilities. Contaminated packaging should be disposed of as unused product.

First Aid / Accidental Release

  • Do not give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
  • If inhaled, move to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
  • Rinse with plenty of water for at least 15 minutes and consult a physician.
  • Wash with soap and plenty of water. Consult a physician.
  • Do not generate dust when collecting and disposing. Sweep and shovel up. Place in a suitable closed container for disposal.
  • Use personal protective equipment. Avoid dust generation. Avoid inhalation of vapors, mists or gases. Ensure adequate ventilation. Evacuate personnel to a safe area. Avoid inhalation of dust. See
  • Do not allow product to enter drains.
  • The product Remaining solutions and non-recyclable solutions should be handed over to a licensed company for disposal. Contact a professional organization with a waste disposal license to handle this substance. Burn contaminated packaging in a chemical incinerator with post-combustion and washing capabilities. Contaminated packaging should be disposed of as unused product.

Firefighting / Stability

  • If necessary, wear a self-contained breathing apparatus for firefighting.
  • Stability and reactivity
  • Carbon monoxide, carbon dioxide, boron oxides

Physical and Chemical Reference

Melting Point

142.0 °C

Catalog reference value; verify against supplier SDS before use.

Vapor Pressure

Estimated very low; unit not specified

Catalog reference value; verify against supplier SDS before use.

Transport / Shipment Review

Shipment review

Shipment details require review before fulfillment.

Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.

  • Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.