CAS 98892-76-3 Safety Reference and Supplier SDS Request

• Including any incompatibility. Close tightly. Dry. Store in a well-ventilated area. Recommended storage conditions: Purge, room temperature
• If exposed to a harmful environment, use a P95 (US) or P1 (EU UK 143) particulate respirator. For higher level of protection, use an OV/AG/P99 (US) or ABEK-P2 (EU UK 143) gas filter. Respirators must be tested and approved by government standards such as NIOSH (US) or CEN (EU).
• The product, remaining and non-recyclable solutions should be handed over to a licensed company for disposal. Contact a professional institution with a waste disposal license to handle this substance. Dissolve or mix with flammable solvents and burn in a chemical incinerator with post-combustion and washing functions. Contaminated packaging. Dispose of as unutilized product.

• Do not give anything to an unconscious person. Rinse mouth with water. Consult a physician.
• If inhaled, move the person to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
• Rinse with plenty of water for at least 15 minutes and consult a physician.
• Wash with soap and plenty of water. Consult a physician.
• Do not generate dust when collecting and disposing. Sweep and shovel up. Place in a suitable closed container for disposal.
• Do not allow the product to enter drains.
• The product, remaining and non-recyclable solutions should be handed over to a licensed company for disposal. Contact a professional institution with a waste disposal license to handle this substance. Dissolve or mix with flammable solvents and burn in a chemical incinerator with post-combustion and washing functions. Contaminated packaging. Dispose of as unutilized product.

• If necessary, wear a self-contained breathing apparatus for firefighting.
• Reactivity and reaction
• Carbon monoxide, carbon dioxide, hydrogen bromide, nitrogen oxides

Physical property reference values are not available in the current MolGraph catalog record.

• Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.