Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
2060039-09-8
Chemical name
7-Methyl-6-(trifluoromethyl)-1H-indole-2-carboxylic acid
Molecular formula
C11H8F3NO2
Molecular weight
243.18 g/mol
Synonyms
7-Methyl-6-(trifluoromethyl)-1H-indole-2-carboxylicacid
InChIKey
GTWOOHMYRZQWQS-UHFFFAOYSA-N
PubChem CID
125456284
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or fume hood.
- Avoid inhalation, ingestion, and skin/eye contact.
- Keep container tightly closed in a dry, cool, and well-ventilated place.
- Store away from incompatible materials.
- Use appropriate PPE such as lab coat, compatible gloves, and eye protection.
- Wear respiratory protection if ventilation is inadequate or if there is a risk of dust/aerosol exposure.
- Ensure adequate ventilation, especially in confined areas.
- Dispose through approved chemical waste channels according to local and institutional regulations.
- Do not dispose of in drains or with household waste.
First Aid / Accidental Release
- In case of skin contact, wash immediately with plenty of soap and water.
- For eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If inhaled, move to fresh air and keep at rest in a position comfortable for breathing.
- If swallowed, rinse mouth. Do NOT induce vomiting.
- Seek medical attention if irritation persists or symptoms develop, following institutional procedures.
- Evacuate personnel to safe areas.
- Avoid dust or aerosol generation.
- Wear appropriate personal protective equipment.
- Collect spilled material using trained-lab procedures, avoiding dispersion.
Firefighting / Stability
- Use extinguishing media appropriate for the surrounding fire.
- Do not use a direct water stream as it may spread the fire.
- Firefighters should wear self-contained breathing apparatus and full protective gear.
- Remove containers from fire area if it can be done without risk.
- Considered stable under recommended storage conditions.
- Avoid strong oxidizing agents, strong acids, and strong bases.
- May decompose under fire conditions, producing hazardous fumes.
- No known hazardous reactions under normal conditions of use.
Physical and Chemical Reference
Appearance
White to off-white crystalline powder
Catalog reference value; verify against supplier SDS before use.
Physical State
Solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
200.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
400.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.45 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
Slightly soluble
Catalog reference value; verify against supplier SDS before use.
Flash Point
250.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated very low; unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
350.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
293399
Preliminary catalog cue; verify before compliance decisions.
HS Code
293399
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.