Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
2225181-30-4
Chemical name
(2-Iodo-6-(trifluoromethyl)pyridin-4-yl)boronic acid
Molecular formula
C6H4BF3INO2
Molecular weight
316.81 g/mol
Synonyms
2-Iodo-6-(trifluoromethyl)pyridine-4-boronic acid
InChIKey
UPEWVRKWCJWWRH-UHFFFAOYSA-N
PubChem CID
133634711
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or fume hood.
- Avoid inhalation, ingestion, and skin/eye contact.
- Keep container tightly closed in a dry and well-ventilated place.
- Store away from incompatible materials.
- Protect from light and moisture.
- Wear appropriate protective clothing, such as a lab coat.
- Use compatible chemical-resistant gloves.
- Wear approved eye protection, such as safety goggles or a face shield.
- If ventilation is inadequate, wear respiratory protection suitable for the hazard.
First Aid / Accidental Release
- In case of inhalation, move to fresh air. If not breathing, give artificial respiration. Seek medical attention.
- For skin contact, wash immediately with plenty of soap and water. Remove contaminated clothing. Seek medical attention if irritation persists.
- In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention.
- If swallowed, rinse mouth with water. Do NOT induce vomiting. Seek medical attention according to institutional procedures.
- Evacuate personnel to safe areas and ensure adequate ventilation.
- Avoid dust or aerosol generation during cleanup.
- Wear appropriate personal protective equipment, including respiratory protection if needed.
- Collect spilled material using trained laboratory procedures and place in a suitable container for disposal.
- Prevent further leakage or spillage if it is safe to do so.
Firefighting / Stability
- Use dry chemical, carbon dioxide, water spray, or alcohol-resistant foam for extinction.
- Wear self-contained breathing apparatus and full protective gear for firefighting.
- Keep containers cool with water spray if exposed to fire.
- Avoid breathing fumes or vapors from fire.
- May be sensitive to light and moisture.
- Avoid strong oxidizing agents, strong bases, and strong acids.
- May decompose upon heating, releasing hazardous fumes.
- Consider potential for dust explosion if finely divided.
Physical and Chemical Reference
Appearance
White to off-white solid
Catalog reference value; verify against supplier SDS before use.
Physical State
Solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
180.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
350.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.7 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
Slightly soluble
Catalog reference value; verify against supplier SDS before use.
Flash Point
180.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated very low; unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
400.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
293399
Preliminary catalog cue; verify before compliance decisions.
HS Code
293399
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.