Preliminary reference disclaimer
This preliminary safety reference is generated from structured MolGraph catalog fields and public reference-style data. It is not a supplier-issued Safety Data Sheet and should not be used as a substitute for supplier-issued documentation, workplace safety review, transport classification, or regulatory compliance decisions. For supplier SDS or COA, submit a documentation request through MolGraph.
Identity
CAS Number
2121515-21-5
Chemical name
2-Chloro-5-(trifluoromethyl)pyridine-4-boronic acid pinacol ester
Molecular formula
C12H14BClF3NO2
Molecular weight
307.5 g/mol
Synonyms
881-598-8; 2-chloro-4-(tetramethyl-1,3,2-dioxaborolan-2-yl)-5-(trifluoromethyl)pyridine; E91667
InChIKey
RSFBRSNYUZUDAM-UHFFFAOYSA-N
PubChem CID
74789416
Hazard / GHS Reference
GHS Pictograms
GHS07
Catalog reference cue; confirm supplier documentation before use.
Handling & PPE
- Handle in a well-ventilated area or under a fume hood.
- Avoid contact with skin, eyes, and clothing.
- Avoid inhalation of vapor or mist.
- Keep container tightly closed in a dry and well-ventilated place.
- Store away from incompatible materials.
- Wear safety glasses with side-shields.
- Wear a laboratory coat or protective clothing.
- Wear compatible protective gloves.
- Use respiratory protection if ventilation is inadequate or exposure limits are exceeded.
First Aid / Accidental Release
- If inhaled, move to fresh air. If not breathing, give artificial respiration.
- In case of skin contact, wash off with soap and plenty of water.
- In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes.
- If swallowed, rinse mouth with water. Do NOT induce vomiting.
- Seek medical attention if irritation or symptoms persist.
- Wear appropriate personal protective equipment.
- Avoid dust formation and prevent breathing vapors, mist, or gas.
- Ensure adequate ventilation.
- Prevent further leakage or spillage if safe to do so.
Firefighting / Stability
- Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
- Do not use a solid water stream as it may spread the fire.
- Wear self-contained breathing apparatus for firefighting if necessary.
- Wear full protective gear to prevent contact with skin and eyes.
- May emit toxic fumes under fire conditions.
- Stable under recommended storage conditions.
- Avoid strong oxidizing agents, strong acids, and strong bases.
- May decompose upon heating.
- Hazardous decomposition products may include carbon oxides, nitrogen oxides, hydrogen chloride, and hydrogen fluoride.
Physical and Chemical Reference
Appearance
White to off-white crystalline powder
Catalog reference value; verify against supplier SDS before use.
Physical State
Solid
Catalog reference value; verify against supplier SDS before use.
Melting Point
137.0 °C
Catalog reference value; verify against supplier SDS before use.
Boiling Point
264.0 °C
Catalog reference value; verify against supplier SDS before use.
Density
1.4 g/cm³
Catalog reference value; verify against supplier SDS before use.
Water Solubility
4.07 × 10⁻⁴ mol/L
Catalog reference value; verify against supplier SDS before use.
Flash Point
157.0 °C
Catalog reference value; verify against supplier SDS before use.
Vapor Pressure
Estimated value, unit not specified
Catalog reference value; verify against supplier SDS before use.
Autoignition Temp
450.0 °C
Catalog reference value; verify against supplier SDS before use.
Transport / Shipment Review
HS6
293499
Preliminary catalog cue; verify before compliance decisions.
HS Code
293499
Source: catalog inference.
GHS Pictograms
GHS07
Preliminary catalog cue; verify before compliance decisions.
Compliance
standard-ruo
Preliminary catalog cue; verify before compliance decisions.
Registration Status
DSL: pending; AICS: pending; ENCS: pending; ICSR: pending; TSCA: pending; IECSC: pending; INSQR: pending; REACH: pending; K-REACH: pending; SEA_Regulatory: pending
Registration values are catalog reference status cues and may require jurisdiction-specific review.
Shipment review
Shipment details require review before fulfillment.
Preliminary catalog cue; verify before compliance decisions.
- Transport classification must be confirmed using supplier SDS and shipment documentation before dispatch.